Binatone iDECT Carrera Solo Plus User Manual - Page 10

2 INSTALLING YOUR PHONE 2.1 Connecting the Base Station 1) Plug the mains power cable and telephone line cord into the base To the mains power socket To the telephone line socket station. 2) Plug the power adapter into a 100 - 240Vac, 50 - 60Hz mains power socket, and the telephone line cord into a telephone line socket. Warning: Always use the cables provided in the box. Use only the supplied adaptor. Using other power cables may damage the unit. Note: Place the base unit within easy reach of the mains power socket. Never try to lengthen the mains power cable. The base station needs mains power for normal operation, and the cordless handsets will not work without it. 2.2 Installing and Charging the Rechargeable Batteries 1) Insert the 2 supplied batteries into the battery compartment, observing the correct polarity (see markings inside battery compartment). Warning: Use only the supplied NiMH rechargeable batteries. 2) Place the back cover over the back of the handset and press down until it clicks into place. 3) Place the handset on the base and charge for 15 hours before using the handset for the first time. • The handset will give a double beep when it is properly placed on the base or charging pod. • The battery charging indicator on the base or charging pod lights up to indicate charging. Note: The handset may become warm when the batteries are being charged or during prolonged periods of use. This is normal and does not indicate a fault. 8