Binatone iDECT Carrera Solo Plus User Manual - Page 42
Advanced Settings
View all Binatone iDECT Carrera Solo Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
10 ADVANCED SETTINGS 10.1 Handset Registration IMPORTANT: When you purchase your phone system, all handsets are already registered to your base, so you do not need to register them. Handset registration is only necessary when you buy extra handsets or if a handset has become faulty. You can register up to four handsets to one base station, with each handset's number (1 to 4) shown on its display. Note: Each handset can only be registered to one base. You need to enter the Master PIN before you can register or unregister handsets. The default Master PIN is 0000. 10.2 Register Additional Handsets 1. Press and hold the key under the base unit for approximately 5 seconds. • The message indicator on the base will flash for up to 1 minute, while it is in registration mode. M 2. On the handset, press . M 3. Press +/- to ADVANCED SET and then press to select. M 4. Press +/- to REGISTRATION and then press to select. • If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat from step 1. M 5. Enter the Master PIN and then press to confirm. Note: The default Master PIN is 0000. • WAITING flashes on the screen. • A confirmation tone is played to indicate successful registration, and the handset will return to standby mode, with its handset number displayed. • If no base is found with the entered PIN, error tones are played to indicate failed registration and the handset returns to standby mode. You will need to repeat from step 1 above. 40