Binatone iDECT Carrera Solo Plus User Manual - Page 43
returns to standby mode.
View all Binatone iDECT Carrera Solo Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
10.3 Un-register your Handset You can unregister the handset you are using. M 1. From the home screen, press . M 2. Press +/- to ADVANCED SET and then press to select. M 3. Press +/- to UNREGISTER and then press to select. M 4. Enter the Master PIN and then press to confirm. Note: The default Master PIN is 0000. 5. Press +/- to select the handset number to un-register M O and then press to confirm or press to cancel the un-registration procedure. • A confirmation tone is played to indicate successful un-registration. • If no action is taken on the handset within 15 seconds, the un-registration procedure will be aborted and the handset returns to standby mode. 10.4 Change the Master PIN The Master PIN is used for registration/un-registration of handsets. The default Master PIN number is 0000. The maximum length of the Master PIN is 8 digits. Note: If you forget your PIN code, you can reset it to its default 0000 using a handset Reset. (See Reset the Unit on page 43.) M 1. From the home screen, press . M 2. Press +/- to ADVANCED SET and then press to select. M 3. Press +/- to CHANGE PIN and then press to select. M 4. Enter the current Master PIN and then press to confirm. • The PIN will be shown as asterisks (*) on the screen as you enter them. M 5. Enter the new PIN and then press to confirm. • A confirmation tone is played. 41