Biostar 945GC MICRO 775 Setup Manual - Page 79
Suspend Mode, HDD Power Down, Soft-Off by PWR-BTN, HPET Support, HPET Mode
View all Biostar 945GC MICRO 775 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
945GC-M7 SE / 945GC Micro 775 Suspend Mode The item allows you to select the suspend type under ACPI operating system. The Choices: Disabled, 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min, 1 Hour (default). This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer. Blank Screen This option only writes blanks to the video buffer. HDD Power Down When enabled, the hard disk drive will power down and after a set time of system inactivity. All other devices remain active. The Choices: Disabled, 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15 Min (default). Soft-Off by PWR-BTN Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state when the system has "hung." The Choices: Delay 4 Sec, Instant-Off (default). HPET Support This item allows you to enable or disable HPET. The Choices: Enabled (default), Disabled. HPET Mode This item allows you to select the HPET mode. The Choices: 32-bit mode (default), 64-bit mode. 27