Biostar M6VLA M6VLA user's manual - Page 47

Chapter 2 BIOS Setup 2.5 Integrated Peripherals Figure 5. Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2000 Award Software Integrated Peripherals OnChip IDE Control Muti-Media Setting Init Display First IDE HDD Block Mode Onboard FDD Controller Onboard Serial Port 1 Onboard Ir Port X UART 2 Mode X IR Function Duplex X TX, RX inverting enable Onboard Parallel Port Onboard Parallel Mode ECP Mode use DMA Parallel Port EPP Type Press Enter Press Enter PCI Slot Enabled Enabled Auto Disabled HPSIR Half No, Yes 378/IRQ7 Normal 3 EPP1.9 Item Help Menu Level :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults OnChip IDE Control The chipset contains a PCI IDE interface with support for two IDE channels. Select "Enabled" to activate the first and/or second IDE interface. Select "Disabled" to deactivate an interface, if you install a primary and/or secondary add-in IDE interface. If you highlight the literal "Press Enter" next to the "Onchip IDE Control" label and then press the enter key, it will take you a submenu with the following options: OnChip IDE Channel 0 The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled to activate the primary IDE interface. Select Disabled to deactivate this interface. The Choices: Enabled (default), Disabled. OnChip IDE Channel 1 The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled to activate the secondary IDE interface. Select Disabled to deactivate this interface. The Choices: Enabled (default), Disabled. 2-17