Biostar M6VLA M6VLA user's manual - Page 54
Wake Up Events
View all Biostar M6VLA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 2 BIOS Setup Wake Up Events If you highlight the literal " Press Enter" next to the "Wake Up Events" label and then press the enter key, it will take you a submenu with the following options: VGA When set to on, any event occurring at a VGA port will awaken a system which has been powered down. The Choices: Off (default), On. LPT&COM When set to On, any event occurring at a VGA Port will awaken a system which has been powered down. The Choices: LPT/COM (default), COM, , LPT, NONE. HDD&FDD When set to On(default), any event occurring at a hard or floppy drive will awaken a system which has been powered down. The Choices: On (default), Off. PCI MASTER When set to On, any event occurring at PCI will awaken a system which has been powered down. The Choices: Off (default), On. Wake Up On LAN/Ring To use this function, you need a LAN add-on card which support power on function. It should also support the wake-up on LAN jump. The Choices: Disabled (default),Enabled. RTC Alarm Resume When "Enabled", you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode. The Choices: Disabled (default),Enabled. Date (of Month) You can choose which month the system will boot up. 2-24