Biostar P4TCA PRO P4TCA Pro BIOS setup guide - Page 19

P4TCA Pro BIOS Setup The Choices: Enabled (default), Disabled. Realtek Wirless LAN(optional) This item allows you to enable or disable the Onboard Realtek Wirless Controller. The Choices: Enabled (default), Disabled. Wirless Function(optional) This item allows you to switch the Wireless Function from Wireless Audio and Wireless Lan. The Choices: Wireless Audio(default)., Wirless LAN CSA Gigabit Ethernet(optional) This item allows you to enable or disable the CSA Gigabit Ethernet. The Choices: Disabled (default), Enable. Super IO Device Press Enter to configure the Super I/O Device. Power On Function This item allows you to choose the powen on function. The Choices: Button (default), Password, Hot Key, Mouse Left, Mouse Right, Any Key, Keyboard 98. KB Power on Possword Input password and press Enter to set the Keyboard power on password . HOT Key power ON Input password and press Enter to set the Keyboard power on password . The Choices: Ctrl-F1(default) , Ctrl-F2 , Ctrl-F3 , Ctrl-F4 , Ctrl-F5, Ctrl-F6 , Ctrl-F7 , Ctrl-F8 , Ctrl-F9, Ctrl-F10 , Ctrl-F11 , Ctrl-F12 . Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If install and FDC or the system has no floppy drive, select Disabled in this field. The Choices: Enabled (default), Disabled. Onboard Serial Port 1 Select an address and corresponding interrupt for the first and second serial ports. The Choices: 3F8/IRQ4 (default), Disabled, Auto, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3. Onboard Serial Port 2 Select an address and corresponding interrupt for the first and second serial ports The Choices: 2F8/IRQ3, Disabled (default), Auto, 3F8/IRQ4 , 3E8/IRQ4, 2E8/IRQ3. 18