Bissell ProHeat Pet Upright Carpet Cleaner 89108 User Guide - Page 14

Operation Cleaning with attachments (continued) 7. Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet. 8. When cleaning is complete, remove and rinse tools in clean, running water. 9. Wrap hose around the tool caddy. 0. Empty water tank and rinse out, following the instructions on page 11. 11. Return ready tools dial to floor cleaning. WARNING: To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing. Maintenance and care Machine storage Once your cleaning is complete, make sure the water tank is emptied and rinsed out. Put the unit away in a closet or basement for the next use. The formula tank can remain filled and ready to go (store with machine set to water 4. rinse setting), or it can simply be emptied back into the formula bottle if that is more convenient. Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty. Machine care For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Turn power and heater switches OFF ( 0 ). Unplug the machine and wrap the power cord. 2. After emptying the water tank, rinse it out at a faucet with running hand hot tap water, taking care to clean underneath the heavy duty bladder, and all around it. Clean out lint trap. 3. Replace the 2-in-1 Tank on the machine. Flow Indicator 14 w w w . b i s s e l l . c o m 800.237.7691