Bissell ProHeat Pet Upright Carpet Cleaner 89108 User Guide - Page 9

Operation Fill the water tank 1. Release the handle and lay the machine 1. 2. handle back to access the tank. 2. Remove the tank from the base of the machine by lifting the tank carry handle. 3. Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Lift off and set the lid aside. 4. Fill up the bladder with clean hand hot tap water. 3. 4. *Do not boil or microwave water as it can destroy the bladder. 5. Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid. 5. Note: Remember to secure the lid and test to make sure it is secure before picking up the Tank. 6. Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position. Bring machine handle back into upright position. Fill the formula tank 1. 2. 1. Lift the formula tank up and out of the machine base. 2. Fill the formula tank by first unscrewing the cap and insert. Always use genuine BISSELL 2X formulas to maximize cleaning and for the safety of your machine. Fill water to water line and then fil up to formula line with BISSELL 2X concentrated formula. Place formula tank into the slot in the side of the machine for a snug fit. Note: Make sure grommet is properly seated to avoid leaking. Choose the SmartMix setting Simply choose one of the 3 settings • Heavy Traffic • Normal • Water Rinse and the ProHeat will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need. NOTE: When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time! WARNING: To Reduce the Risk of Fire and Electric Shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. SmartMix Dial www.bissell.com 800.237.7691 9