Bissell ProHeat Pet Upright Carpet Cleaner 89108 User Guide - Page 16
Twarning
View all Bissell ProHeat Pet Upright Carpet Cleaner 89108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Troubleshooting Heater ready light does not illuminate. WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. Possible Causes Remedies 1. The heater switch is not turned ON ( I ). 1. Turn ON ( I ) the heater switch. 2. The machine power switch is not 2. Both switches must be ON ( I ) to turned ON ( I ). to activate the heater ready light. Reduced spray or no spray. Possible Cause Remedies 1. Bladder may be empty. 1. Refill bladder with hot tap water. 2. Heater tank may be empty. 2. Fill with BISSELL Deep Cleaning formula for cleaning. Fill with water if rinsing. 3. The filter may be clogged. 3. Clean out flow indicator filter, page 12. 4. Tanks may not be seated properly. 4. Turn power OFF (O); remove & reseat tanks. 5. Pump may have lost prime. 5. Turn power OFF (O); after 1 minute turn ON and press trigger. 6. The Pump belt may be broken. 6. Turn on the machine and check to see that the DirtLifter PowerBrush turns. If it does not, refer to #1 below. DirtLifter PowerBrush does not turn. Possible Cause Remedies 1. The brush belt or pump belt 1. Turn the machine OFF (O) and unplug is off or broken. from the outlet. To check if the brush belt or pump belt has broken, you will need a flat head screwdriver. Insert the blade end into the lower slot of the belt access door to release Lift Here the lower snap. If necessary, insert the blade end into the upper slot to release the upper snap. Examine the belt for breakage. If broken, please refer to Replacement Parts on page 19 before calling Consumer Services. Complete installation instructions Insert Sc rewdriver will accompany the replacement belt. Blade Here 16 w w w . b i s s e l l . c o m 800.237.7691