Bissell ProHeat Pet Upright Carpet Cleaner 89108 User Guide - Page 6

Assembly The only thing you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide upper handle onto lower handle. 2. Feed bundled power cord through tool caddy from caddy's flat side. 3. Align upper handle holes and tool caddy holes. 4. Place hex nut into back of tool caddy and hold in place. Insert bolt from front to back turning into the hex nut until snug. Do not over tighten. Repeat for the second bolt and hex nut. 11. 5. Insert 2 screws into lower 2 holes. Turn until snug. 6. Snap tool(s) into storage on the tool caddy. 7. Wrap power cord and flex hose as shown in figure 7. ProHeat assembly is now complete. Warning: Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures. 2. 3. 4. Special features of your BISSELL ProHeat 5. Your BISSELL ProHeat deep cleaner is a home 66. cleaning system that automatically mixes hot tap water with BISSELL advanced cleaning formulas and heats the solution as it is applied to the carpet. The combina- tion of heated solution, rotating brushes and powerful suction provide a safe and effective method of cleaning. 7. 6 www.bissell.com 800.237.7691