Bissell ProHeat Pet Upright Carpet Cleaner 89108 User Guide - Page 15

Maintenance and care Machine care (continued) 4. Clean out the flow indicator filter each time it is used to ensure best cleaning performance. Unscrew the flow indicator cap, lift out the red rotor and white filter. Rinse all three parts with water. Replace the filter and rotor. Replace the flow indicator cap. Turn until snug, do not over-tighten. 5. Any loose hair or debris can be pulled from the brush roll if desired and thrown away. 6. Wipe the machine's exterior with a soft cloth. 7. After carpet is dry, vacuum again to remove hair and fuzz. Stain removal Do Not Delay! Attending to an accident soon after it occurs ensures the chances for full removal. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. 2. Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other utensil with sharp edges because it could damage the carpet or upholstery. 3. If the area has dried, remove the remaining semi-solids and residue with a sweeper or vacuum. 4. Be sure to test any spot removal formulas in an inconspicuous area first. This is important as some dyes and materials could be damaged or discolored by cleaning solvents. If such a change should occur, try a different solution or call a professional. 5. If cleaning on Berber carpeting, gently run your machine over a hidden area. If no fuzzing occurs, continue cleaning in soiled area. 6. Using the BISSELL Tough Stain PreCleaner, spray evenly over soiled area. Do not overwet. Wait 3-5 minutes. Gently work the solution by blotting area with a clean, damp, color safe cloth. 7. Clean using either the floor cleaning or tools setting on the ReadyTools dial. www.bissell.com 800.237.7691 15