Bosch B21CL80SNS Instructions for Use - Page 6

Scope of Delivery, Installing the appliance - ice maker

Page 6 highlights

en-us IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS! Scope of Delivery After unpacking all parts, check for any damage in transit. If there is damage, do not plug in your appliance. Please contact the dealer. The following parts are included: n Free-standing appliance n Interior fittings (depending on model) n Bag containing installation materials n Operating instructions n Installation instructions n Customer service booklet n Warranty enclosure n Registration card n Information on the energy consumption and noises Installing the appliance Have an authorized technician install and connect the appliance according to the enclosed Installation Instructions. WARNING Do not install the appliance: n outdoors, n in an environment subject to drips of water, n in rooms with risk of frost. Installation location WARNING Risk of explosion! Do not install the appliance near explosive or flammable substances. A dry, well-ventilated room is suitable as an installation location. The installation location should not be exposed to direct sunlight or placed near a heat source, e.g. a cooker, radiator, etc. If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances from the heat source: n 1 1/4I (3 cm) to electric or gas stoves. n 11 3/16I (30 cm) to oil or solid fuel stoves. To ensure that the Ice Maker functions correctly, the appliance must be upright. Climatic classes The climate class can be found on the rating plate. The climate class indicates within which ambient temperatures the appliance can be operated. Climatic class SN N ST T Permitted ambient temperature 50 °F to 90 °F (+10 °C to 32 °C) 61 °F to 90 °F (+16 °C to 32 °C) 61 °F to 100 °F (+16 °C to 38 °C) 61 °F to 110 °F (+16 °C to 43 °C) Subsurface Transporting The appliance is heavy and must be secured during transport and installation. The castors are provided for installation purposes only. Do not use the castors for transporting the appliance. WARNING Risk of injury! The appliance is very heavy. It can fall over and cause serious injuries during transport and installation. At least two people are required to install the appliance safely. Keep the refrigerator doors closed until the appliance is upright and level at the installation location. Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance. NOTICE The appliance is very heavy. The floor on which the appliance is to be installed must be rigid. Reinforce the floor, if necessary. Ventilation The refrigeration unit is ventilated only via the ventilation grille in the base. Never cover the ventilation grille or place anything in front of it. Otherwise the refrigeration unit must work harder, increasing the power consumption. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

en-us
6
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS!
Scope of Delivery
After unpacking all parts, check for any damage in
transit.
If there is damage, do not plug in your appliance.
Please contact the dealer.
The following parts are included:
n
Free-standing appliance
n
Interior fittings (depending on model)
n
Bag containing installation materials
n
Operating instructions
n
Installation instructions
n
Customer service booklet
n
Warranty enclosure
n
Registration card
n
Information on the energy consumption and noises
Installing the appliance
Have an authorized technician install and connect the
appliance according to the enclosed Installation
Instructions.
WARNING
Do not install the appliance:
n
outdoors,
n
in an environment subject to drips of water,
n
in rooms with risk of frost.
Transporting
The appliance is heavy and must be secured during
transport and installation.
The castors are provided for installation purposes
only.
Do not use the castors for transporting the appliance.
WARNING
Risk of injury!
The appliance is very heavy. It can fall over and
cause serious injuries during transport and
installation. At least two people are required to
install the appliance safely. Keep the refrigerator
doors closed until the appliance is upright and level
at the installation location.
Hidden surfaces may have sharp edges. Use
caution when reaching behind or under appliance.
Installation location
WARNING
Risk of explosion!
Do not install the appliance near explosive or
flammable substances.
A dry, well-ventilated room is suitable as an installation
location. The installation location should not be
exposed to direct sunlight or placed near a heat
source, e.g. a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use a suitable
insulating plate or observe the following minimum
distances from the heat source:
n
1舂
1/4
I
(3 cm) to electric or gas stoves.
n
11舂
3/16
I
(30 cm) to oil or solid fuel stoves.
To ensure that the Ice Maker functions correctly, the
appliance must be upright.
Climatic classes
The climate class can be found on the rating plate.
The climate class indicates within which ambient
temperatures the appliance can be operated.
Climatic class
Permitted ambient temperature
SN
50 °F to 90 °F (+10 °C to 32 °C)
N
61 °F to 90 °F (+16 °C to 32 °C)
ST
61 °F to 100 °F (+16 °C to 38 °C)
T
61 °F to 110 °F (+16 °C to 43 °C)
Subsurface
NOTICE
The appliance is very heavy.
The floor on which the appliance is to be installed
must be rigid. Reinforce the floor, if necessary.
Ventilation
The refrigeration unit is ventilated only via the
ventilation grille in the base. Never cover the
ventilation grille or place anything in front of it.
Otherwise the refrigeration unit must work harder,
increasing the power consumption.