Bosch SHX4AP06UC Use and Care Manual - Page 10

Rack Accessories

Page 10 highlights

Rack Accessories * Extra Tall item Sprinkler (select models) If an item istoo tall to be placed into the bottom rack even with the top rack in the raised position, remove the empty top rack by pulling it out of the dishwasher until it stops. Pull the front of the rack upward and outward until the rollers are completely free of the roller guides. Set the top rack aside. Push the roller guides back into the dishwasher. Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock it into position. Load the dishwasher lower rack as shown below. It can accommodate items up to 22" tall. • Retrieve the top rack • Tilt the rack upwards and position the top rack rollers onto the roller guides. ° Continue pushing the top rack until the rollers are on the guide. ° Push the rack into the dishwasher all the way. Flip Tines Do not block vent The racks on select models consist of tines that you can fold down or raise depending on what you have to load in the rack. To fold down: • Grasp the tine. • Release from notch. • Push downwards. Manual Rack Height Adjustment avoid dishwasher damage, do not reinstall the to without removing the extra tall item sprinkler. NOTE: Keep the vent on the tub's left side clear by placing tall items such as plastic cutting boards and tall baking sheets on the bottom rack's right side, or center. To remove the sprinkler and return the dishwasher to its normal condition: ° Turn the sprinkler counterclockwise and remove it. 10 Remove the empty rack by pulling it out of the dishwasher to the point that it can be lifted upward, as shown above. Pull the rack outward and up until the rollers are completely free of the roller guides.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Rack Accessories
*
Extra Tall item
Sprinkler
(select
models)
If an
item is
too tall to be placed
into
the bottom
rack even
with the top rack in the raised position,
remove
the empty
top rack by pulling
it out of the dishwasher
until
it stops.
Pull the front
of the rack upward
and outward
until
the
rollers are completely
free of the roller guides.
Set the top rack aside. Push the roller guides back into the
dishwasher.
Insert the Extra Tall Item Sprinkler
into the top
rack spray outlet
and turn
the sprinkler
clockwise
to lock
it into position.
Load the dishwasher
lower
rack as shown
below.
It can accommodate
items up to 22" tall.
Retrieve
the top rack
Tilt the rack upwards
and position
the top rack rollers
onto the roller guides.
°
Continue
pushing
the top rack until
the rollers are on
the guide.
°
Push the rack into the dishwasher
all the way.
Flip Tines
Do not block vent
The racks on select models
consist
of tines that
you can
fold down
or raise depending
on what
you have to load
in the rack.
To fold down:
Grasp the tine.
Release from
notch.
Push downwards.
Manual
Rack Height
Adjustment
avoid dishwasher
damage, do not reinstall
the to
without
removing
the extra tall item sprinkler.
NOTE: Keep the vent on the tub's left side clear by placing tall
items such
as
plastic
cutting
boards
and tall
baking sheets
on
the
bottom
rack's right side, or center.
To remove
the sprinkler
and return
the dishwasher
to its
normal
condition:
°
Turn the sprinkler
counterclockwise
and remove
it.
10
Remove
the
empty
rack by
pulling
it
out
of
the
dish-
washer to the point that it can be lifted
upward,
as shown
above.
Pull the rack outward
and up until
the rollers
are
completely
free of the roller guides.