Bosch SHX4AP06UC Use and Care Manual - Page 19

Operating the Dishwasher SHESAL, SHE4AP Child Lock Active Clean Sanitized RinseAgent Half Load (-- c_ Power -Scrub /iiiiiiiii) Auto -Wash _iiiiiii# Regular-Wash _i_iiiiii# Delicate -Wash _ Quick Wash gililililiiii_i Program Select @ BOSCH 3h. 6h. 9h. Delay EcoSense Start C> To start the dishwasher: • Door must be closed. Press the"ON/OFF' button. • One of the Wash Cycle LEDs will be flashing. You can now select a wash cycle. • Press the "" button to select the desired wash cycle. • Select the "Half Load" or "Delay Start" features if desired at this point. If you would like to delay the start time of the dishwasher press the "DELAY" button until the desired delay time (3,6,9 hrs.) is displayed by the corresponding LED. • Press the "START" button to begin the cycle (Wash Cycle Indicator Light will stop flashing) NOTE: Rinse Agent Indicator Light will be illuminated if the unit needs Rinse Agent. To enter the options mode(rinse agent setting, ex- tra dry heat, cycle completion signal): • Door must be closed. Press the "ON/OFF" button to turn the unit on. • One of the Wash Cycle LEDs will be flashing. • Press and hold down the ">" button, then press and release the "START/RESET" button. Now release the ">" button. • The "Clean" and one other LED will be flashing. You are now in the options setup mode. • Press ">" to select the option you would like to adjust. If the "Clean" and "Rinse Agent" LED are flashing you can adjust the Rinse Agent settings. If the "Clean" and "Sanitized" LED are flashing you can set the Extra Dry Heat. Child Lock • After pressing the "START" button the Child Lock feature. you can activate • Press and hold down the "