Bosch SHX4AP06UC Use and Care Manual - Page 21

& Maintenance

Page 21 highlights

Care & Maintenance Maintenance Tasks Certain areas of your dishwasher require occasional maintenance. The maintenance tasks are easy to do and will ensure continued superior performance from your dishwasher: 3. Remove the spray arm as shown below. • Wiping up Spills and Splash-outs Water may occasionally splash out of your dishwasher, especially if you interrupt a cycle or open the dishwasher door during a cycle. To avoid floor damage and possible mold growth, do not allow wet areas to remain around or under the dishwasher. • Clean the Stainless Steel Inner Door and Tub Clean the outer edges of the inside door panel regularly to remove debris that might collect from normal loading. If spots begin to appear on the stainless steel tub or inner door, make sure the rinse agent reservoir is full. • Check and clean the Spray arm nozzles Occasionally check the spray arms to ensure that the spray arm nozzles (holes) are unobstructed. You must remove the spray arms to check them for obstruction. To remove the top spray arm: 1. Remove the empty top rack from the dishwasher. 4. Look for obstruction in the spray nozzles. 5. If the spray nozzles need cleaning, flush them under running water. To reinstall the top spray arm: 1. Return the top spray arm to its installed position. 2. Return the locking nut to its installed position and turn it 1/8 turn clockwise. 3. Return the top rack to the top rack roller guides. To remove the bottom spray arm: 1. Remove the empty bottom rack from the dishwasher tub. 2. Grasp and lift the bottom spray arm as shown below. . Turn the rack upside down. The top spray arm is held in position by a locking nut as shown below. Turn the locking nut counter-clockwise and remove it as shown below to release the spra arm. 3. Look for obstruction in the spray nozzles. 4. If the spray nozzles need cleaning, flush them under running water. To reinstall the bottom spray arm: 1. Return the bottom spray arm to its installed position and press it so that it snaps into place. 2. Return the bottom rack to its installed position. • Check and clean the filter system This dishwasher has a filter system that consists of a Large Object Trap/Cylinder Filter assembly, Fine Filter, and a Micro Filter. The filter system is located on the inside of your dishwasher under the lower rack and is easily accessible. During normal use, the filter system is selfcleaning. You should occasionally inspect it for foreign objects and clean it when necessary. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Care
Maintenance
Tasks
Certain
areas
of
your
dishwasher
require
occasional
maintenance.
The maintenance
tasks are easy to do and
will
ensure
continued
superior
performance
from
your
dishwasher:
& Maintenance
3.
Remove the spray arm as shown
below.
Wiping
up
Spills
and Splash-outs
Water
may
occasionally
splash
out
of your
dishwasher,
especially
if you interrupt
a cycle or open the dishwasher
door
during
a cycle. To avoid floor
damage
and possible
mold
growth,
do not allow
wet areas to remain
around
or
under
the dishwasher.
Clean the Stainless
Steel Inner Door
and
Tub
Clean the outer
edges of the inside door
panel
regularly
to remove
debris
that
might
collect
from
normal
loading.
If spots begin
to appear on the stainless steel tub or inner
door, make sure the rinse agent reservoir
is full.
Check and
clean
the Spray arm
nozzles
Occasionally
check the spray arms to ensure that the spray
arm
nozzles (holes)
are unobstructed.
You must
remove
the spray arms to check them
for obstruction.
To remove the
top
spray
arm:
1.
Remove the empty
top
rack
from the dishwasher.
4.
Look for obstruction
in the spray nozzles.
5.
If the spray nozzles need cleaning,
flush
them
under
running
water.
To reinstall
the top spray arm:
1.
Return the top spray arm to its installed
position.
2.
Return
the
locking
nut to
its installed
position
and
turn
it 1/8 turn
clockwise.
3.
Return the top rack to the top rack roller guides.
To remove the bottom
spray
arm:
1.
Remove the empty
bottom
rack from
the dishwasher
tub.
2.
Grasp and lift the bottom
spray arm as shown
below.
.
Turn the rack upside down.
The top spray arm is held
in position
by
a locking
nut
as shown
below.
Turn
the locking
nut counter-clockwise
and
remove
it as
shown
below to release the spra
arm.
3.
Look for obstruction
in the spray nozzles.
4.
If the spray nozzles need cleaning,
flush
them
under
running
water.
To reinstall
the bottom
spray arm:
1.
Return the bottom
spray arm to
its installed
position
and press it so that
it snaps into place.
2.
Return the bottom
rack to its installed
position.
Check
and
clean
the filter
system
This dishwasher
has a filter system that consists of a Large
Object
Trap/Cylinder
Filter
assembly,
Fine
Filter,
and
a
Micro
Filter.
The
filter
system
is located
on
the
inside
of
your
dishwasher
under
the
lower
rack
and
is easily
accessible.
During
normal
use, the filter
system
is self-
cleaning.
You should
occasionally
inspect
it for
foreign
objects
and clean it when
necessary.
21