Bose Noise Cancelling 700 UC English Owners Guide - Page 44
Reconnect a set of headphones to the Bose USB Link, Clear the headphone device list
View all Bose Noise Cancelling 700 UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
BLUETOOTH CONNECTIONS RECONNECT A SET OF HEADPHONES TO THE BOSE USB LINK Remove the USB Link from the USB port on your computer, and then reinsert it. The light on the USB Link will blink as it tries to reconnect to previously connected sets of headphones. CONNECT ANOTHER SET OF HEADPHONES TO THE BOSE USB LINK You can store up to eight devices (headphones) in the device list of the Bose USB Link. 1. Press and hold the button on the Bose USB Link for approximately 3 seconds, and then release it. The light on the USB Link will slowly pulse blue to indicate it is ready to connect to another Bluetooth device. 2. Enable your Bose headphones to connect to a new Bluetooth device. Wait a moment for your headphones to connect to the USB Link. The light on the USB Link will blink rapidly and then remain solid when connected to the headphones. NOTE: If the Bose USB Link does not connect to a set of Bose Bluetooth headphones after approximately 5 minutes, the light on the USB Link will stop blinking. If you want to connect another set of Bose Bluetooth headphones, repeat the actions above. CLEAR THE HEADPHONE DEVICE LIST 1. Press and hold Power/Bluetooth button until you hear "Bluetooth device list cleared," and the Bluetooth light slowly pulses blue. 2. Delete the headphones from the Bluetooth list on your device. All devices are cleared, and the headphones are ready to connect. CLEAR THE BOSE USB LINK DEVICE LIST Press and hold the button on the Bose USB Link for 7-10 seconds. The light on the USB Link will slowly pulse blue. All devices are cleared, and the USB Link is ready to connect. | 4 4 E N G