Boss Audio BV7330 User Manual in English - Page 22

OPERATION 6) DIGITAL SETUP When you open the DIGITAL menu, you will see the following picture: DIGITAL SETUP OP MODE DYNAMIC RANGE DUAL MONO * OP MODE: to set the operating modes for Dolby Digital decoder, there are LINE OUT and RF REMOD to be selected. * DYNAMIC RANGE: you can adjust the dynamic range between OFF, 1/8, 2/8. 3/8, 1/2, 5/8, 3/4, 7/8, full. * DUAL MONO: there are STEREO, MONO L, MONO R and MIX MONO to be selected. Note: The displayed setting information is different according to different version. ƹ On-screen Display Function Press the OSD button on the front panel or on the remote control during playback to display the console information of the current disc on the screen. For an example (when playing a DVD disc): Once you press OSD button you will see the information as the following order. 1) Item: TT Function: Display the current title number and total title number. 2) Item: CH Function: Display the current chapter number and total chapter number. 3) Item: (This icon only displayed for several seconds, after several seconds it will disappeared.) Function: Display the played time of the current chapter. 4) C-: Display the remaining time of the current chapter. 5) T: Display the played time of the current title. 6) T-: Display the remaining time of the current title. 7) C: Display the played time of the current chapter. 8) Display the current disc's LANGUAGE, AUDIO TYPE, SUBTITLE LANGUAGE and PLAY ANGLE. Note: The displayed information is different according to different type of discs. ƹ Last Play Memory 1) During disc playback, if you turn off the unit and then turn on the unit again, the DVD unit will resume playing from the point that just interrupted. 2) During disc playback, if you press MODE button to switch to other mode, then return to DVD mode again, the unit will resume playing from the point that just interrupted. USB PLAY OPERATION On the front of the unit, when you open the USB cover, you will see an USB interface. An USB device can be connected through this interface. When you connect an USB device through the interface, the unit will search 21