Boss Audio BV7330 User Manual in English - Page 24

OPERATION 1) Store in Memory Press and hold desired radio preset buttons (numeric buttons 1~6) on the remote control or on the front panel for several seconds, the memory icon will be shown display and the current listening station will be stored into the number button. 2) Retrieve a Preset Station Press any one of the radio preset buttons (numeric buttons 1~6) on the remote control or on the front panel to retrieve a station which had been stored in the memory in advance and the chosen frequency will be shown on display. ƹ Automatic memory storing & program scanning 1) Program scanning Shortly press AMS button on remote control to scan preset station. 2) Automatic memory storing Press and hold press AMS button on remote control or BAND/AMS button on the front panel for about several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then stations are stored into the preset number button in turn according to the strength of the stations. When auto search is finished, it will enter into preset scan mode automatically. Note: Press and hold 1-6 numeric buttons on the remote control for about several seconds, will store the current station to the current numeric key position. ƹ Local/Distant Press LOC button on the remote control to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. ƹ Mono/Stereo Press ST button on remote control or MON/LOU button on the front panel to select mono or stereo mode. You can sometimes improve reception of distant stations by selecting mono operation. AUX IN OPERATION On the front panel of the unit, there is an AUX IN jack. When you connected the audio/video device from the jack, press MODE button on the remote control or MODE on the front panel to select AUX IN mode. 23