Bowflex Revolution Assembly Manual - Page 10
Step 3
View all Bowflex Revolution manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8 Unboxing Your Bowflex Revolution® Home Gym Step 3 Parts: • Rear Stabilizer (Box 2) Tools: • 5/16" Allen Wrench • 7/32" Allen Wrench • 3/4" Wrench or Adjustable Wrench 3-1 Place the Rear Stabilizer in the bracket on the Main Frame with the feet pointing away from the frame Make sure the two bolt holes in the Rear Stabilizer are pointing downward. 3-2 Install but do not tighten two 3/8"x 3/4" Allen Bolts and 3/8" washers in the underside of the Rear Stabilizer. 3-3 Install two 1/2"x3 1/4" Allen Bolts with 1/2" washers and Nylock Nuts in the sides of the Rear Stabilizer. 3-4 Completely tighten all of the hardware. 3-5 Slide the Foot Caps onto the feet of the Rear Stabilizer. Foot Cap Threaded bolt holes point downward 1/2" Washer 1/2" Nylock Nut Main Frame Rear Stabilizer Feet point away from frame Bracket 1/2"x 3 1/4" Allen Bolt 1/2" Washer 3/8" Washer 3/8"x 1/4" Allen Bolt Hardware (1:1): 2 Allen Bolt (1/2" X 3 1/4") 2 Washer (3/8") 4 Washer (1/2") 2 Nylock Nut (1/2") 2 Allen Bolt (3/8" X 3/4")