Bowflex Revolution Assembly Manual - Page 11

Unboxing Your Bowflex Revolution® Home Gym 9 Step 4 Parts: • Platform ( Box 3) Tools: • 5/16" Allen Wrench Platform Push up on Platform to align holes. Main Frame 1/2" Allen Bolt 4-1 Insert Platform into main frame with the rubber pads pointing downward. Rubber Pads point 4-2 Install but do not tighten four 1/2"x 3/4" downward Allen Bolts in the sides of the frame. You may have to push up on the wheel end of the platform to allow screws to align with the threaded hole in the platform. 1/2" Washer You will install an additional screw in the Platform when the unit is upright. Hardware (1:1): 4 Allen Bolt (1/2" X 3/4 ") 4 Washer (1/2") Step 5 5-1 If possible, use two people to slowly roll the box completely over so the unit rests on the Rear Stabilizer and Platform.