Bowflex Revolution Assembly Manual - Page 15
Step 4, Tighten Tension Shaft Holder
View all Bowflex Revolution manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Assembling Your Bowflex Revolution® Home Gym 13 Step 4 Tighten Tension Shaft Holder Tools: • 7/32" Allen Wrench 4-1 Use a 7/32" Allen Wrench to tighten the Tension Shaft Holder by tightening the screws in numerical order shown on the tensioner. Tighten the two screws marked 1, then the two marked 2, etc. Note: Do not replace Top Cover at this time. Tension screws Tighten screws in order 1&1 , 2&2, 3&3, then 4&4. Tension Shaft Holder
13
Step 4
Tighten Tension Shaft Holder
Tools:
• 7/32” Allen Wrench
4-1
Use a 7/32” Allen Wrench to tighten the Tension Shaft Holder by
tightening the screws in numerical order shown on the tensioner.
Tighten the two screws marked 1, then the two marked 2, etc.
Note:
Do not replace Top Cover at this time.
Tighten screws in order
1&1 , 2&2, 3&3, then
4&4.
Tension Shaft Holder
Tension screws
Assembling Your Bowflex
Revolution
®
Home Gym