Bowflex Revolution Assembly Manual - Page 20

18 Assembling Your Bowflex Revolution® Home Gym Step 11 Install Seat Assembly Parts: • Seat Assembly (Box 5) Pop Pin 11-1 Slide the Seat Assembly onto the Seat Rail. Make sure the Pop Pin is on the left when facing the unit as shown. Reverse view of Seat Assembly Seat Assembly Seat Rail Step 12 Install Front Stabilizer to Four Bar Assembly Parts: • Four Bar (Box 4) • Front Stabilizer (Box 4) Tools: • 5/16" Allen Wrench • 3/4" Wrench or Adjustable Wrench Four Bar Assembly 3/8" Allen Bolt 3/8" Washer Front Stabilizer Point on Four Bar this direction 12-1 Place the Four Bar Assembly on the Front Stabilizer with the Front Stabilizer feet pointing in the same direction as the point on the Four Bar as shown. 1/2" Nylock Nut 12-2 Install but do not tighten two 3/8"x 3/4" Allen Bolts and two 3/8" Washers in the top holes. Feet Point in this direction 12-3 Install two 1/2"x 3 1/4" Allen Bolts and two 1/2" Washers in the side holes. 1/2" Washer 1/2"x 3 1/4 Allen Bolt 12-4 Completely tighten all of the hardware. Hardware (1:1): 4 Washer (3/8") 2 Allen Bolt (1/2" X 3 1/4") 4 Washer (1/2") 2 Nylock Nut (1/2") 2 Allen Bolt (3/8" X 3/4")