Brother International 2070N Users Manual - English - Page 15
tray at any one time., or 21 lb of plain or bond paper in the paper - paper jam
UPC - 012502612308
View all Brother International 2070N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3 While pressing the blue paper-guide release lever, slide the paper guides to fit the paper size. Check that the guides are firmly in the slots. 4 Put paper in the tray. About this printer 1 5 Check that the paper is below the maximum paper mark (▼). Note • Paper jams may occur if you put more than 250 sheets (80 g/m2 or 21 lb) of plain or bond paper in the paper tray at any one time. • Paper jams may occur if you put more than 10 transparencies in the paper tray at any one time. • When you use pre-printed paper, put the side that is going to be printed on (blank side) face down, with the top of the paper at the front of the tray. 6 Put the paper tray firmly back in the printer. Check that it is completely in the printer. 1 - 8
About this printer
1 - 8
1
3
While pressing the blue paper-guide release lever, slide
the paper guides to fit the paper size. Check that the
guides are firmly in the slots.
4
Put paper in the tray.
5
Check that the paper is below the maximum paper mark
(
▼
).
Note
•
Paper jams may occur if you put more than 250 sheets
(80 g/m
2
or 21 lb) of plain or bond paper in the paper
tray at any one time.
•
Paper jams may occur if you put more than 10
transparencies in the paper tray at any one time.
•
When you use pre-printed paper, put the side that is
going to be printed on (blank side) face down, with the
top of the paper at the front of the tray.
6
Put the paper tray firmly back in the printer. Check that it is completely in the printer.