Brother International 2070N Users Manual - English - Page 74
Error message printout, Error message, Action - windows 8 driver
UPC - 012502612308
View all Brother International 2070N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Troubleshooting Error message printout The printer will report problems by printing an error message as defined in the following table. Take the corrective actions for the error message. 6 Error message Action MEMORY FULL ■ Press the Go button to print the data left in the printer. Cancel the print job if you want to delete the data remaining in the printer, see Cancel printing on page 3-7. ■ Reduce the print resolution or reduce the complexity of your document. PRINT OVERRUN ■ Press the Go button to print the data left in the printer. Cancel the print job if you want to delete the data remaining in the printer, see Cancel printing on page 3-7. ■ If this does not clear the error, reduce the complexity of your document or reduce the print resolution. ■ Set page protection to AUTO by using the supplied Windows® driver or Remote Printer Console program. ■ Change the following settings in the supplied Windows® driver and try again. The best combination of these settings will vary depending on your document: • Graphics mode • TrueType mode • Use Printer TrueType® Fonts RESOLUTION REDUCED TO ■ Reduce the complexity of your document before you print to prevent ENABLE PRINTING (The printer has printed the automatic reduction in the resolution. document at a reduced resolution) 6 - 3