Brother International 2070N Users Manual - English - Page 83
White Spots on black text and, graphics at 75 mm, 0 in. intervals, Black Spots at 75 mm
UPC - 012502612308
View all Brother International 2070N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Troubleshooting Examples of poor print quality Recommendation ■ If the problem is not solved after printing a few pages, the drum unit may have glue from label stock on the OPC drum surface. Clean the drum unit as follows: 6 75 mm (3.0 in.) 75 mm (3.0 in.) 1 Position the print sample in front of the drum unit, and find the exact position of the poor print. White Spots on black text and graphics at 75 mm (3.0 in.) intervals 75 mm (3.0 in.) 75 mm (3.0 in.) 2 Turn the drum unit gear by hand while looking at the surface of the OPC drum. Black Spots at 75 mm (3.0 in.) intervals 3 When you have located the mark on the drum that matches the print sample, wipe the surface of the OPC drum with a cotton swab until the dust or paper powder on the surface comes off. Note Do not try to clean the surface of the photosensitive drum with a sharp object. ■ The drum unit may be damaged. Put in a new drum unit. See Replacing the drum unit on page 5-8. 6 - 12