Brother International 5234PRW Users Manual - English and Spanish - Page 20

Threading the upper looper

Get Brother International 5234PRW PDF manuals and user guides View all Brother International 5234PRW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Threading the upper looper Run the thread in the sequence illustrated, following the pink color and the numbers next to each threading point. 1 2 3 4 3 5. Guide the thread down the channel and pass the thread through the threading points 5678 next to the pink color marks following the numerical order in the accompanying illustration. NOTE: Make sure to thread only through the upper thread take up 7. 6. Pass the thread through the eye of the upper looper 9. NOTE: If the upper looper thread breaks during sewing: This may be caused by the lower looper thread getting caught on the upper looper. If this happens, lower the upperlooper by turning the hand wheel, remove the lower looper thread from the upper looper, and re-thread the upper looper from at least the tension disc. 4 5 9 8 76 8 9 6 7 1. Open the front cover by sliding to the right and guiding the top toward you. 2. Pull the thread off the spool and directly up through the thread holder 1 and the thread holder 2 on the thread tree from back to front. 3. Pass the thread through the thread guide 3 on the top of machine. 4. Pass the thread through the tension disc 4 which is in the channel next to the pink tension adjustment dial. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
16
5.
Guide the thread down the channel and pass
the thread through the threading points
5678
next to the pink color marks following
the numerical order in the accompanying
illustration.
NOTE:
Make sure to thread only through the upper thread
take up
7
.
6.
Pass the thread through the eye of the upper
looper
9
.
NOTE:
If the upper looper thread breaks during sewing:
This may be caused by the lower looper thread getting
caught on the upper looper. If this happens, lower the
upperlooper by turning the hand wheel, remove the
lower looper thread from the upper looper, and re-thread
the upper looper from at least the tension disc.
Threading the upper looper
Run the thread in the sequence illustrated,
following the pink color and the numbers next to
each threading point.
2
1
3
4
3
4
5
6
8
9
7
7
6
8
9
1.
Open the front cover by sliding to the right and
guiding the top toward you.
2.
Pull the thread off the spool and directly up
through the thread holder
1
and the thread
holder
2
on the thread tree from back to front.
3.
Pass the thread through the thread guide
3
on
the top of machine.
4.
Pass the thread through the tension disc
4
which is in the channel next to the pink tension
adjustment dial.