Brother International 5234PRW Users Manual - English and Spanish - Page 9
Trim trap, Wide table
View all Brother International 5234PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English Trim trap The optional trim trap holds the trimmed fabric and thread produced when sewing. 2. Position the fabric, and start sewing. (See CHAPTER 5.) To install: Insert the trim trap until it contacts the front cover. NOTE: Be sure to position the positioning guide to the one on the machine. To remove: Slowly pull out the trim trap. NOTE: The optional trim trap can also be used as the foot controller holder. CAUTION Always remove the foot controller from the trim trap when carrying the machine. Free-arm sewing (removing bed extension) Free-arm sewing enables tubular pieces to be sewn more easily. 1. Remove the bed extension . Wide table Using the wide table makes the large piece sewing easy. To install: Attach the wide table by pushing it in the direction of the arrow until the edge line 1 is aligned to the line 2 of the bed extension . 2 1 To remove: To remove the wide table , lift up the machine a little and then pull out the wide table in the direction of the arrow. NOTE: Do not move the machine while the wide table is attached, otherwise damage or injuries may occur. NOTE: Be careful not to lose the removed bed extension. 5