Brother International 5234PRW Users Manual - English and Spanish - Page 24
Sewing
View all Brother International 5234PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
CHAPTER 5 SEWING Stitch selection Select the stitch pattern before you start sewing. This sewing machine can sew five different stitches by following the simple steps below: Four-thread overlock stitch Use all four threads and two needles for producing four-thread overlock stitches. Use: Produces strong seam. Ideal for sewing knits and wovens. Three-thread overlock stitch 5 mm (3/16 inch) Use three threads and the left needle, producing 5 mm (3/16 inch) seams. Use: For overlock stitching on suits, blouses, slacks, etc. Ideal for medium to heavy materials. NOTE: Remove the right needle when sewing this overlock stitch. Three-thread overlock stitch 2.8 mm (7/64 inch) Use three threads and the right needle, producing 2.8 mm (7/64 inch) seams. Use: For overlock stitching on suits, blouses, slacks, etc. Ideal for fine to medium materials. NOTE: Remove the left needle when sewing this overlock stitch. Two-thread overlock stitch 5 mm (3/16 inch) Use two threads and the left needle, producing 5 mm (3/16 inch) seams. Use: For overlock stitching on suits, blouses, slacks, etc. Ideal for fine to medium materials. NOTE: Remove the right needle when sewing this overlock stitch. Two-thread overlock stitch 2.8 mm (7/64 inch) Use two threads and the right needle, producing 2.8 mm (7/64 inch) seams. Use: For overlock stitching on suits, blouses, slacks, etc. Ideal for fine to medium materials. NOTE: Remove the left needle when sewing this overlock stitch. Narrow overlock stitch 2.0mm (5/64 inch) and Rolled hemming stitch 2.0mm (5/64 inch) Use as decorative or finishing stitch. See "Narrow overlock/Rolled hemming stitch" in this chapter for details. NOTE: You can use the optional accessory foot for even more varieties of stitches. See CHAPTER 8 for details. Test sewing Make the test sewing before you start sewing. 1. Set the thread tension as follows: · Set all the thread tension to "4". · Set the needle thread tension to "2". · Set the lower looper thread tension to "6". (See "Chart of two-thread overlock stitch" in this chapter for details.) 2. Thread the machine and pull all threads out about 15 cm (6 inches) behind the presser foot. 20