Brother International ADS-2500W Quick Setup Guide - English - Page 29
Important, g
View all Brother International ADS-2500W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Wireless Network Windows® d When this screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next. f The installation of the Brother drivers will automatically start. The installation screens appear one after another. Important DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear. If you are using a firewall other than the Windows® Firewall or the Windows® Firewall is off, this screen may appear. See the instructions provided with your firewall software for information on how to add the following network ports. For network scanning, add UDP port 54925. If you still have trouble with your network connection, add UDP port 137 and 161. e Choose your machine from the list, and then click Next. Note For Windows Vista® and Windows® 7, when the Windows® Security screen appears, click the check box and click Install to complete the installation correctly. g When the On-Line Registration screen is displayed, make your selection and follow the on-screen instructions. Windows® Macintosh Wireless Network Note • If your machine is not found over the network, confirm your settings by following the on-screen instructions. If you encounter this failure, go to step 9-b on page 18 and setup the wireless connection again. • If you are using WEP and the LCD displayed Connected but your machine is not found on the network, make sure you entered the WEP key correctly. The WEP key is case sensitive. 29