Brother International CP-1800 Owners Manual - English - Page 13

Loading the paper, the roll of paper into the paper compartment.

Page 13 highlights

3. Operation Loading the paper In order to print out what is written on the copyboard, paper must first be loaded in the printer. The maximum diameter of the paper roll that can be installed in the copyboard is 2.6 in. (66 mm). 1 Open the paper compartment by pulling up its latch. b Do not open the paper compartment while the unit is printing. 2 While gently pressing down on the center of the paper guide bar, insert the roll of paper into the paper compartment. + The paper should unroll from the top and enough paper (about 8 in. (20 cm)) should be pulled out to allow it to be torn off easily. If there is slack in the paper, tighten it by holding the core and pulling on the paper. 2 1 Be sure to pass the paper over the guide bar. 3 Release the bar while making sure that the paper feeds over it, and then lift the paper compartment cover with both hands and firmly close it. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

11
Loading the paper
In order to print out what is written on the copyboard, paper must first be loaded in the
printer. The maximum diameter of the paper roll that can be installed in the copyboard is
2.6 in. (66 mm).
1
Open the paper compartment by pulling up its latch.
b
Do not open the paper compartment while the unit is printing.
2
While gently pressing down on the center of the paper guide bar, insert
the roll of paper into the paper compartment.
+
The paper should unroll from the top and enough paper (about 8 in. (20 cm))
should be pulled out to allow it to be torn off easily.
If there is slack in the paper, tighten it by holding the core and pulling on the paper.
3
Release the bar while making sure that the paper feeds over it, and then
lift the paper compartment cover with both hands and firmly close it.
1
2
Be sure to pass the paper over the guide bar.
3. Operation