Brother International CP-1800 Owners Manual - English - Page 8
Mounting the copyboard, into the anchors, while making sure to use the enclosed washers.
![]() |
View all Brother International CP-1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Setup 5 Remove each screw. 6 Attach the wall-mounting bar to the wall by re-installing the screws into the anchors, while making sure to use the enclosed washers. a Make sure that the bar is firmly attached to the wall, otherwise the copyboard may fall down. Mounting the copyboard 1 While holding both sides of the copyboard, hook the brackets at the back of the copyboard onto the wall-mounting bar pegs. a Do not release the copyboard until you are sure that it is securely mounted on the wall-mounting bar, otherwise the copyboard may fall down. 6
![](/manual_guide/products/brother-international-cp1800-owners-manual-english-d069328/8.png)
6
2. Setup
5
Remove
each scr
ew.
6
Attach the wall-mounting bar to the wall by re-installing the screws
into the anchors, while making sure to use the enclosed washers.
a
Make sure that the bar is firmly attached to the wall, otherwise the
copyboard may fall down.
Mounting the copyboard
1
While holding both sides of the copyboard, hook the brackets at the
back of the copyboard onto the wall-mounting bar pegs.
a
Do not release the copyboard until you are sure that it is securely mounted
on the wall-mounting bar, otherwise the copyboard may fall down.