Brother International CP-2000 Owners Manual - English - Page 20
Power supply, Connect the AC adaptor cord to the DC jack on the left side of the printer
View all Brother International CP-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. Operation 4 Tear off the excess paper by holding the side of the paper and pulling it upward and across. bc Remove the roll of paper before transporting the copyboard, otherwise it may come unrolled in the printer and cause a paper jam. Power supply Follow the precautions below to reduce the risk of electric shock or fire. a If the unit will not be used for a long period of time, disconnect the AC adaptor from the wall outlet. Do not use the AC adaptor outdoors. It can only be used indoors. Do not allow any objects to come into contact with the AC adaptor or its cords. The AC adaptor must not be serviced by the user. If repairs are required, contact the nearest authorized Brother Service Center or the Brother Service Center indicated in the warranty documentation. If the AC adaptor requires cleaning, use only a dry cloth. Never use water or cleaning fluids, since this is extremely dangerous. Be careful not to pinch or damage either adaptor cable when folding up the stand or moving the copyboard. Use only enclosed AC adaptor. Use of other AC adaptor will void the warranty. 1 Connect the AC cord to the AC adaptor. 2 Connect the AC adaptor cord to the DC jack on the left side of the printer 3 Connect the AC cord to an electrical wall outlet. 4 Set the power supply switch on the left side of the printer to "|" to turn on the copyboard. 1 4 2 18 3