Brother International CP-2000 Owners Manual - English - Page 6
Stand, Setting up the stand
View all Brother International CP-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. Setup Stand Setting up the stand a + Do not allow young children to play on or near the copyboard when it is set up on its stand. After removing the copyboard from its box, keep the printer and writing surface covered in the bubble wrap packaging while setting up the copyboard. 1 Lay the copyboard on the floor facing downward with the printer control panel and writing surface positioned over a piece of cloth or other protective sheet to prevent them from being damaged. c b Do not exert pressure on the copyboard. + If the printer has been installed on the long edge of the copyboard, refer to step 5 on page 12 for details on installing the printer on the short edge before continuing this procedure. If the stand is not attached, refer to page 15 for details on re-attaching it. 2 Grab the leg of the stand as shown in the illustration and slowly fold out the stand. a Be careful not to pinch your finger between the plastic projection on each leg of the stand and the stopper. 4