Brother International DCP 165C Users Manual - English - Page 77
Stop/Exit, Error Message, Cause, Action - free installer
UPC - 012502620440
View all Brother International DCP 165C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Troubleshooting and Routine Maintenance Error Message Cause Action Cannot Print Replace XX Ink One or more of the ink cartridges have reached the end of their life. The machine will stop all print operations. Replace the ink cartridges. (See Replacing the ink cartridges on page 69.) Clean Unable XX The machine has a mechanical problem. -OR- A foreign object such as a clip or ripped paper is in the machine. Open the scanner cover and look inside the machine for any foreign objects. If the error message continues, disconnect the machine from the power source for several minutes then reconnect it. Close Ink Cover The ink cartridge cover is not completely closed. Firmly close the ink cartridge cover until it clicks. Cover is Open The scanner cover is not closed completely. Lift the scanner cover and then close it again. Data Remaining Print data is left in the machine's memory. Press Stop/Exit. The machine will cancel the job and clear it from the memory. Try to print again. High Temperature The print head is too warm. Allow the machine to cool down. Hub is Unusable. A Hub or USB Flash memory drive A Hub or USB Flash memory drive with a Hub with a Hub has been connected to are not supported. Unplug the device from the the USB direct interface. USB direct interface. Init Unable XX The machine has a mechanical Open the scanner cover and look inside the problem. machine for any foreign objects. If the error -OR- message continues, disconnect the machine B from the power source for several minutes then A foreign object such as a clip or reconnect it. ripped paper is in the machine. Ink Low Black The indicated ink cartridge is Ink Low Yellow running out of ink. Ink Low Cyan Ink Low Magenta Order a new ink cartridge. You can continue printing until the LCD display shows Cannot Print. (See Ordering accessories and supplies on page ii) Low Temperature The print head is too cold. Allow the machine to warm up. Media Error The memory card is either corrupted, improperly formatted, or there is a problem with the memory card. Put the card firmly into the slot again to make sure it is in the correct position. If the error remains, check the media drive (slot) of the machine by putting in another media card that you know is working. Media is Full. The memory card or USB flash memory drive you are using already contains 999 files. Your machine can only save to your memory card or USB flash memory drive if it contains less than 999 files. Try deleting unused files to free some space and try again. No Cartridge An ink cartridge is not installed properly. Take out the new ink cartridge and re-install it slowly until it clicks. (See Replacing the ink cartridges on page 69.) No File The memory card or USB Flash memory drive in the media drive does not contain a .JPG file. Put the correct memory card or USB Flash memory drive into the slot again. 65