Brother International DCP-9045CDN Users Manual - English - Page 29
Labels, Types of labels to avoid, Unprintable area, Unprintable area for copies - fuser
UPC - 012502618751
View all Brother International DCP-9045CDN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Loading paper and documents Labels 2 The machine will print on most types of labels designed for use with a laser machine. Labels should have an adhesive that is acrylic-based since this material is more stable at the high temperatures in the fuser unit. Adhesives should not come in contact with any part of the machine, because the label stock may stick to the belt unit or rollers and cause jams and print quality problems. No adhesive should be exposed between the labels. Labels should be arranged so that they cover the entire length and width of the sheet. Using labels with spaces may result in labels peeling off and causing serious jams or print problems. All labels used in this machine must be able to withstand a temperature of 392 degrees Fahrenheit (200 degrees centigrade) for a period of 0.1 seconds. Label sheets should not exceed the paper weight specifications described in this User's Guide. Labels exceeding this specification may not feed or print properly and may cause damage to your machine. Labels can be fed from the MP tray only. Types of labels to avoid 2 Do not use labels that are damaged, curled, wrinkled or an unusual shape. Unprintable area 2 Unprintable area for copies 2 The printable area of your machine begins at 2 approximately 0.16 in. (4 mm) from the top and bottom and 0.12 in. (3 mm) from both sides of the paper. 2 2 1 1 1 0.16 in. (4 mm) 2 0.12 in. (3 mm) Note This unprintable area shown above is for a single copy or a 1 in 1 copy using Letter size paper. The unprintable area changes with the paper size. CAUTION Avoid feeding labels with the carrier sheet exposed because your machine will be damaged. 15