Brother International DreamWeaver„ VQ3000 Users Manual - English - Page 27
Using the Machine Setting Mode Key
View all Brother International DreamWeaver„ VQ3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
LCD SCREEN Using the Machine Setting Mode Key B Press to change the default machine settings (needle stop position, opening display, etc.). 1 Memo • Press or next to the page numbers, to display a different settings screen. Getting Ready a f i g j b k c l d h e m m m a Select whether to use the sewing speed controller to determine the zigzag width (see page S-39). b Make adjustments to character or decorative stitch patterns (see page S-82). c Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.) d Adjust the presser foot pressure. (The higher the number, the greater the pressure will be. Set the pressure at "3" for normal sewing.) (see page S-17) If the dual feed foot is installed and its roller is lowered, the pressure setting is fixed at "2" and cannot be changed. e Fine tune the feed of the dual feed foot (see page B-54). f Select whether "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is the utility stitch that is automatically selected when the machine is turned on. (see page S-21) g Select whether "Utility Stitch" or "Quilt Stitch" displayed first on the stitch selection screen when the "Sewing" is selected. h You can activate this setting after connecting the optional multi-function foot controller. (These settings are not operable unless the optional multi-function foot controller is attached to the machine.) i Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page S-15). Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm). (see page S-15) j Change the height of the presser foot when the machine is set to free motion sewing mode (see page S-40). k When set to "ON", the thickness of the fabric is automatically detected by an internal sensor while sewing. This enables the fabric to be fed smoothly (see pages S-8 and S-17). l Adjust the guideline marker position and brightness (see page S-14). m Press to save the current settings screen image to USB media (see page B-29) Basic operations B-25