Brother International DreamWeaver„ XE VM6200D Users Manual - English - Page 125
Appliqué
View all Brother International DreamWeaver„ XE VM6200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
SEWING THE STITCHES Memo • Using a straight stitch (middle needle position) makes it easier to sew smoothly (see page S-24). • For models equipped with the guideline marker: In the case Q-01(center, at width 3.5 mm) is selected, if the guideline marker is set at 10.0 mm (3.5 mm plus 6.5 mm, close to 1/4 inch), you can sew piecing with referring the guideline marker. d Select and attach presser foot "J". S e Use the quilting appliqué stitch to attach the appliqué. Sew around the edge while dropping the needle as close to the edge as 2 possible. Utility Stitches ■ Appliqué a Trace the pattern onto the appliqué fabric and then cut around it, leaving a 3 mm to 5 mm (approx. 1/8 inch to 3/16 inch) seam allowance. a Seam allowance: 3 mm to 5 mm (approx. 1/8 inch to 3/16 inch) b Place a piece of stabilizer cut to the finished size of the appliqué design onto the fabric, and then fold over the seam margin using an iron. Clip curves when necessary. c Turn the appliqué over, and attach the stabilizer with basting pins or a basting stitch. a Appliqué b Needle drop position CAUTION • Be careful that the needle does not strike a basting pin during sewing. Striking a pin can cause the needle to break, resulting in injury. Sewing S-37