Brother International DreamWeaver„ XE VM6200D Users Manual - English - Page 68

USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Using USB Media or Embroidery Card Reader/USB Card Writer Module* * If you have purchased the PE-DESIGN Ver5 or later, PE-DESIGN NEXT, PE-DESIGN Lite, PED-BASIC or PE-DESIGN PLUS, you can plug the included USB card writer module into the machine as an embroidery card reader, and recall patterns. Memo • USB media is widely used, however some USB media may not be usable with this machine. Please visit our website for more details. • Depending on the type of USB media being used, either directly plug the USB device into the machine's USB port or plug the USB media Reader/Writer into the machine's USB port. Connecting the Machine to the Computer Using the included USB cable, the sewing machine can be connected to your computer. a USB port for mouse / media b USB media a USB port for mouse / media b Embroidery card Reader/USB card writer module* Note • Use only an embroidery card reader designed for this machine. Using an unauthorized embroidery card reader may cause your machine to operate incorrectly. • Embroidery patterns cannot be saved from the machine to an embroidery card inserted into a connected USB card writer module. a USB port for computer b USB cable connector Note • The connectors on the USB cable can only be inserted into a port in one direction. If it is difficult to insert the connector, do not insert it with force. Check the orientation of the connector. • For details on the position of the USB port on the computer (or USB hub), refer to the instruction manual for the corresponding equipment. B-66