Brother International DreamWeaver„ XE VM6200D Users Manual - English - Page 66

BEFORE EMBROIDERING Attaching the Embroidery Unit ■ About the Embroidery Unit CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury. • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine is embroidering. Otherwise, injury may result. • To avoid distorting your embroidery design, do not touch the embroidery carriage and frame when the machine is embroidering. Note • You can also sew utility/decorative stitches with the embroidery unit attached. Touch and . The feed dog will automatically raise for utility and decorative stitching. • Be sure to turn off the power before installing the embroidery unit. Otherwise, the machine may be damaged. • Do not touch the inner connector of the embroidery unit. The pins on the embroidery unit connection may be damaged. • Do not apply strong force to the embroidery unit carriage or pick up the unit by the carriage. Otherwise, the embroidery unit may be damaged. • Store the embroidery unit in the proper storage case. a Turn the main power to OFF, the flat bed attachment. and remove b Insert the embroidery unit connection into the machine connection port. The spring hinge on the connection port cover will allow easy access to the port. Push lightly on the connection port cover until the unit clicks into place. a Embroidery unit connection b Machine connection port Note • Be sure there is no gap between the embroidery unit and the sewing machine. If there is a gap, the embroidery patterns will not embroider with the correct registration. • Do not push on the carriage when installing the embroidery unit onto the machine. Moving the carriage may damage the embroidery unit. c Turn the main power to ON. → The following message will appear. d Press . → The carriage will move to the initialization position. B-64 Note • Either "Embroidery" screen or "Embroidery Edit" screen appears, depending on the setting selected in the settings screen.