Brother International HE-120 Users Manual - English - Page 36

SE-BrotherE_sgml.book Page 30 Monday, June 30, 2003 3:44 PM GETTING READY Thread the thread cassette with the thread d from the spool on the extra spool pin. Thread the needle manually (without using the needle threader) • For more details, refer to "Loading the spool into the thread cassette" (page 24). Check that the thread cassette indicator is lit e up in green, and insert the thread cassette (with the extra spool pin attached) into the thread cassette compartment. Use both hands to press down on both sides of the extra spool pin. When using special thread, thread with a thickness of 130/20 or thicker, the wing needle or the twin needle which cannot be used with the needle threader, thread the needle as described below. Remove the needle. a • Refer to "Replacing the needle" (page 37). • When using the wing needle, the twin needle or thread that cannot be used with the needle threader, be sure to remove the needle, otherwise the machine may be damaged. Check that the thread cassette indicator is lit b up in green, and then insert the thread cassette into the thread cassette compartment. • For details, refer to a through b (page 27). X Pass the thread through the needle bar thread hooks. 1 X At the same time that the thread cassette is inserted, the needle is threaded. X The extra spool pin is now installed. a Needle bar thread hooks Replace the needle. c • Refer to "Replacing the needle" (page 37). Pass the thread through the eye of the needle d from front to back. 30