Brother International HE-120 Users Manual - English - Page 96
select the straight stitch center needle
View all Brother International HE-120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
SE-BrotherE_sgml.book Page 90 Monday, June 30, 2003 3:44 PM UTILITY STITCHES Align the seam with the center of the zipper, e and then baste the zipper in place. Select stitch 3 . h 2 1 3 a Wrong side of fabric b Basting stiching c Zipper Remove about 5 cm (2 inch) from the end of f the basting on the outside. 2 4 3 1 a Wrong side of fabric b Zipper basting c Outside basting d 5 mm (2 inch) Attach the presser foot holder to the right pin g of zipper foot "I". 1 I 2 • For details, refer to "Selecting stitching" (page 47). CAUTION ● When using zipper foot "I", be sure to select the straight stitch (center needle position), and slowly turn the balance wheel toward you to check that the needle does not touch the presser foot. If a different stitch is selected or the needle hits the presser foot, the needle may bend or break. Topstitch around the zipper. i 1 3 2 4 a Pin on the right side b Needle drop point • For details, refer to "Replacing the presser foot" (page 40). 90 a Stitching b Right side of fabric c Basting stitching d End of zipper opening CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Remove the basting stitching. j