Brother International HL-1435 Users Manual - English - Page 23

For two-sided printing, put the side that is going to be printed on blank side face down, with

Get Brother International HL-1435 PDF manuals and user guides View all Brother International HL-1435 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Do not put more than 250 sheets of paper (80 g/m2) in the tray, or paper jams may occur. Check that paper is below the maximum paper mark (▼). Figure 1-8 For two-sided printing, put the side that is going to be printed on (blank side) face down, with the top of the paper at the front of the tray. 5 Put the paper tray firmly back in the printer. Check that it is inserted fully into the printer. Pull up the support flap to prevent paper from sliding off the top output tray. Figure 1-9 If you choose not to pull out the support flap, we recommend that you remove printed pages immediately after they come out of the printer. 6 Send the print data to the printer. 1 - 10 ABOUT THIS PRINTER

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
1 - 10
ABOUT THIS PRINTER
5
Put the paper tray firmly back in the printer. Check that it is inserted fully into the printer.
6
Send the print data to the printer.
Do not put more than 250 sheets of paper (80 g/m
2
) in the tray, or paper jams may occur. Check
that paper is below the maximum paper mark (
▼
).
Figure 1-8
For two-sided printing, put the side that is going to be printed on (blank side) face down, with the
top of the paper at the front of the tray.
Pull up the support flap to prevent paper from sliding off the top output tray.
Figure 1-9
If you choose not to pull out the support flap, we recommend that you remove printed pages
immediately after they come out of the printer.