Brother International HL-4570CDWT Quick Setup Guide - English - Page 14

Wired Network Macintosh For Wired Network Interface Cable Users for Macintosh 7 Before you install a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. IMPORTANT For Mac OS X 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. (For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/.) Note If you want to setup the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and click Downloads on your model page to download the driver and visit FAQ's for installation instructions. b Remove the protective cap from the LAN connector. 8 Install the printer driver a Put the installation CD-ROM into your CD-ROM drive. b Double-click the Start Here OSX icon. Follow the on-screen instructions. Note It may take a few minutes for installation to complete. c Follow the on-screen instructions until this screen appears. Choose your machine from the list, and then click OK. c Connect the network interface cable to the LAN connector marked with a symbol and then connect it to a free port on your hub. Note • If there is more than one of the same model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name. • You can find your machine's MAC Address (Ethernet Address) and IP Address by printing out the Printer Settings Page. See Print the Printer Settings Page on page 25. d When this screen appears, click Next. d Make sure the machine power switch is on. Note When the Brother Support screen appears, make your selection and follow the on-screen instructions. 14