Brother International HL-4570CDWT Quick Setup Guide - English - Page 2

Warning

Page 2 highlights

WARNING • Plastic bags are used in the packaging of your machine. Plastic bags are not toys. To avoid danger of suffocation, please keep these bags away from babies and children and dispose of them properly. • This machine is heavy and weighs approximately 21.0 kg (46.3 lb.). To prevent possible injuries at least two people should lift the machine. Be careful not to pinch your fingers when you put the machine down. • If you use a Lower Tray, carry it separately from your machine. Note • Keep a minimum gap around the machine as shown in the illustration. 200 mm (7.87 in.) 100 mm (4.00 in.) 100 mm (4.00 in.) 250 mm (9.84 in.) • The components included in the box may differ depending on your country. • We recommend that you save the original packaging. • If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid any damage during transit. The machine should be adequately insured with the carrier. How to repack the machine, see Shipment of the machine in the User's Guide. • Illustrations in this Quick Setup Guide are based on the HL-4570CDW. • The interface cable is not a standard accessory. Buy the appropriate interface cable for the interface you want to use (USB or Network). USB cable It is recommended to use a USB 2.0 cable (Type A/B) that is no longer than 2 meters (6 feet). Network cable Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

2
WARNING
Plastic bags are used in the packaging of your machine. Plastic bags are not toys. To avoid danger of
suffocation, please keep these bags away from babies and children and dispose of them properly.
This machine is heavy and weighs approximately 21.0 kg (46.3 lb.). To prevent possible injuries at least
two people should lift the machine. Be careful not to pinch your fingers when you put the machine
down.
If you use a Lower Tray, carry it separately from your machine.
Note
Keep a minimum gap around the machine as shown in the illustration.
The components included in the box may differ depending on your country.
We recommend that you save the original packaging.
If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid
any damage during transit. The machine should be adequately insured with the carrier. How to repack the
machine, see
Shipment of the machine
in the
User's Guide
.
Illustrations in this Quick Setup Guide are based on the HL-4570CDW.
The interface cable is not a standard accessory. Buy the appropriate interface cable for the interface you
want to use (USB or Network).
USB cable
It is recommended to use a USB 2.0 cable (Type A/B) that is no longer than 2 meters (6 feet).
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
100 mm
(4.00 in.)
250 mm
(9.84 in.)
100 mm
(4.00 in.)
200 mm (7.87 in.)