Brother International HL-L2370DWXL Online Users Guide HTML - Page 220
Settings Tables, General Setup], Printer]
View all Brother International HL-L2370DWXL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Home > Machine Settings > Change Machine Settings from the Control Panel > Menu Table (for LCD Models) > Settings Tables Settings Tables Use these tables to understand the various menus and options that you will use to set your preferences on the machine. [General Setup] Level 1 Level 2 Level 3 Description Tray Setting Paper Type - Set the type of paper in the paper tray. Paper Size - Set the size of paper. Check Size - Select whether to display a message telling you to check that the size of the paper in the machine and the machine's Paper Size setting match. Manual Feed - Select whether to print from the Manual Feed Slot. Resolution - - Choose a print resolution. Density - - Increase or decrease the print density. Ecology Eco Mode - Turn on the following machine settings at the same time. • 2-sided Print: Long Edge(Available only for certain models) • Sleep Time:0Min Toner Save - Increase the page yield of the toner cartridge. Sleep Time - Set how much time will pass before the machine enters Power Saving mode. Quiet Mode - Decrease printing noise. Auto Power - Off Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode. Panel Control Button Repeat - Set the time for the LCD message to change when holding a or b at intervals. Message Scroll - Set the time in seconds that an LCD message will scroll across the LCD. From Level 1=0.2 sec to Level 10=2.0 sec. LCD Contrast - Adjust the contrast of the LCD. Auto Online - Set the machine to return to Ready mode after it has been idle for 30 seconds. Setting Lock - - Lock your machine's settings using the Setting Lock password. Interface Select - Select the interface to use. If you select Auto, the machine changes the interface to USB or Network depending on which interface is receiving data. Auto IF Time - Set the time-out period for the auto interface selection. Input Buffer - Increase or decrease the input buffer capacity. Replace Toner - - Sets the machine to continue printing after the LCD displays Replace Toner. [Printer] For Printer Emulation Supported models Level 1 Print Options Level 2 Font List Test Print Description Print the font list and samples. Print a test page. 216