Brother International HL-L2370DWXL Online Users Guide HTML - Page 222

HL-L2350DW, Network]

Page 222 highlights

Level 1 Auto Continue Print Position Level 2 - X Offset Y Offset Description Select if you want the machine to clear paper size errors or media type errors automatically. Move the print start position (at the top-left corner of pages) horizontally up to -500 (left) to +500 (right) dots in 300 dpi. Move the print start position (at the top-left corner of pages) vertically up to -500 (up) to +500 (down) dots in 300 dpi. [Network] (HL-L2350DW) Level 1 WLAN Level 2 TCP/IP Level 3 Boot Method IP Address Subnet Mask Gateway Node Name WINS Config WINS Server DNS Server APIPA Setup Wizard IPv6 - WLAN Assistant - WPS - WPS w/PIN Code - WLAN Status Status Signal Channel Speed MAC Address WLAN Enable SSID Comm. Mode - Level 4 - - Descriptions Choose the IP method that best suits your needs. Enter the IP address. Enter the Subnet mask. - Enter the Gateway address. - Enter the Node name. - Select the WINS configuration mode. Primary Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. Primary Specify the IP address of the primary DNS server. Secondary Specify the IP address of the secondary DNS server. - Allocate the IP address from the link-local address range automatically 1. - Enable or disable the IPv6 protocol. - Configure the wireless network settings using the setup wizard. - Configure your wireless network settings using the Brother installation disc. - Configure your wireless network settings using the one-button push method. - Configure the wireless network settings using WPS with a PIN code. - Display the wireless Ethernet link status. - Display the signal condition. - Display the channel in use when Status is Active. - Display the connection speed when Status is Active. - Display SSID. - Display the current Communication mode. - Display the MAC address of the machine. - Turn the wireless interface on or off. 218

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243

Level 1
Level 2
Description
Auto Continue
-
Select if you want the machine to clear paper size errors or media type
errors automatically.
Print Position
X Offset
Move the print start position (at the top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset
Move the print start position (at the top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in 300 dpi.
[Network]
(HL-L2350DW)
Level 1
Level 2
Level 3
Level 4
Descriptions
WLAN
TCP/IP
Boot
Method
-
Choose the IP method that best suits your
needs.
IP Address
-
Enter the IP address.
Subnet
Mask
-
Enter the Subnet mask.
Gateway
-
Enter the Gateway address.
Node Name
-
Enter the Node name.
WINS
Config
-
Select the WINS configuration mode.
WINS
Server
Primary
Specify the IP address of the primary WINS
server.
Secondary
Specify the IP address of the secondary WINS
server.
DNS Server
Primary
Specify the IP address of the primary DNS
server.
Secondary
Specify the IP address of the secondary DNS
server.
APIPA
-
Allocate the IP address from the link-local
address range automatically
1
.
IPv6
-
Enable or disable the IPv6 protocol.
Setup Wizard
-
-
Configure the wireless network settings using the
setup wizard.
WLAN Assistant
-
-
Configure your wireless network settings using
the Brother installation disc.
WPS
-
-
Configure your wireless network settings using
the one-button push method.
WPS w/PIN Code
-
-
Configure the wireless network settings using
WPS with a PIN code.
WLAN Status
Status
-
Display the wireless Ethernet link status.
Signal
-
Display the signal condition.
Channel
-
Display the channel in use when
Status
is
Active
.
Speed
-
Display the connection speed when
Status
is
Active
.
SSID
-
Display SSID.
Comm. Mode
-
Display the current Communication mode.
MAC Address
-
-
Display the MAC address of the machine.
WLAN Enable
-
-
Turn the wireless interface on or off.
218