Brother International HL-L2370DWXL Online Users Guide HTML - Page 224

Level 1, Descriptions, WPS w/PIN Code

Page 224 highlights

Level 1 Level 2 Level 3 Level 4 Descriptions Wired LAN Ethernet - - Choose the Ethernet link mode. Wired Status - - Display the Ethernet link status. MAC Address - - Display the MAC address of the machine. Set to Default - - Restore wired network settings of your machine to the factory settings. Wired Enable - - Turn the wired interface on or off. WLAN TCP/IP Boot Method - Choose the IP method that best suits your needs. IP Address - Enter the IP address. Subnet Mask - Enter the Subnet mask. Gateway - Enter the Gateway address. Node Name - Enter the Node name. WINS Config - Select the WINS configuration mode. WINS Server Primary Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. DNS Server Primary Specify the IP address of the primary DNS server. Secondary Specify the IP address of the secondary DNS server. APIPA - Allocate the IP address from the link-local address range automatically 1. IPv6 - Enable or disable the IPv6 protocol. Setup Wizard - - Configure the wireless network settings using the setup wizard. WLAN Assistant - - Configure your wireless network settings using the Brother installation disc. WPS - - Configure your wireless network settings using the one-button push method. WPS w/PIN Code - - Configure the wireless network settings using WPS with a PIN code. WLAN Status Status - Display the wireless Ethernet link status. Signal - Display the signal condition. Channel - Display the channel in use when Status is Active. Speed - Display the connection speed when Status is Active. SSID - Display SSID. Comm. Mode - Display the current Communication mode. MAC Address - - Display the MAC address of the machine. Set to Default - - Restore wireless network settings of your machine to the factory settings. WLAN Enable - - Turn the wireless interface on or off. Wi-Fi Direct Push Button - - Configure your Wi-Fi Direct network settings using the one-button push method quickly. 220

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243

Level 1
Level 2
Level 3
Level 4
Descriptions
Wired LAN
Ethernet
-
-
Choose the Ethernet link mode.
Wired Status
-
-
Display the Ethernet link status.
MAC Address
-
-
Display the MAC address of the machine.
Set to Default
-
-
Restore wired network settings of your machine
to the factory settings.
Wired Enable
-
-
Turn the wired interface on or off.
WLAN
TCP/IP
Boot Method
-
Choose the IP method that best suits your
needs.
IP Address
-
Enter the IP address.
Subnet Mask
-
Enter the Subnet mask.
Gateway
-
Enter the Gateway address.
Node Name
-
Enter the Node name.
WINS Config
-
Select the WINS configuration mode.
WINS Server
Primary
Specify the IP address of the primary WINS
server.
Secondary
Specify the IP address of the secondary WINS
server.
DNS Server
Primary
Specify the IP address of the primary DNS
server.
Secondary
Specify the IP address of the secondary DNS
server.
APIPA
-
Allocate the IP address from the link-local
address range automatically
1
.
IPv6
-
Enable or disable the IPv6 protocol.
Setup Wizard
-
-
Configure the wireless network settings using
the setup wizard.
WLAN Assistant
-
-
Configure your wireless network settings using
the Brother installation disc.
WPS
-
-
Configure your wireless network settings using
the one-button push method.
WPS w/PIN Code
-
-
Configure the wireless network settings using
WPS with a PIN code.
WLAN Status
Status
-
Display the wireless Ethernet link status.
Signal
-
Display the signal condition.
Channel
-
Display the channel in use when
Status
is
Active
.
Speed
-
Display the connection speed when
Status
is
Active
.
SSID
-
Display SSID.
Comm. Mode
-
Display the current Communication mode.
MAC Address
-
-
Display the MAC address of the machine.
Set to Default
-
-
Restore wireless network settings of your
machine to the factory settings.
WLAN Enable
-
-
Turn the wireless interface on or off.
Wi-Fi Direct
Push Button
-
-
Configure your Wi-Fi Direct network settings
using the one-button push method quickly.
220