Brother International HL-L2370DWXL Online Users Guide HTML - Page 223
Hl-l2370dw/hl-l2370dwxl
![]() |
View all Brother International HL-L2370DWXL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Level 1 Wi-Fi Direct Network Reset Level 2 Push Button Level 3 - Level 4 - PIN Code - - Manual - - Group Owner Device Info. Status Info. - - Device - Name SSID - IP Address - Status - Signal - Channel - Speed - I/F Enable - - - - - Descriptions Configure your Wi-Fi Direct network settings using the one-button push method quickly. Configure your Wi-Fi Direct network settings using WPS with a PIN code quickly. Configure your Wi-Fi Direct network settings manually. Set your machine as the Group Owner. View your machine's device name. Display the Group Owner's SSID. Display your machine's IP Address. Display the Wi-Fi Direct network status. Display the current Wi-Fi Direct network signal strength. When your machine acts as Group Owner, the LCD always displays Strong. Display the channel in use when the Status is G/O Active or Client Active. Display the connection speed when the Status is G/O Active or Client Active. Enable or disable the Wi-Fi Direct connection. Restore all network settings of your machine to the factory settings. 1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel. [Network] (HL-L2370DW/HL-L2370DWXL) Level 1 Wired LAN Level 2 TCP/IP Level 3 Level 4 Descriptions Boot Method - Choose the IP method that best suits your needs. IP Address - Enter the IP address. Subnet Mask - Enter the Subnet mask. Gateway - Enter the Gateway address. Node Name - Enter the Node name. WINS Config - Select the WINS configuration mode. WINS Server Primary Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. DNS Server Primary Specify the IP address of the primary DNS server. Secondary Specify the IP address of the secondary DNS server. APIPA - Allocate the IP address from the link-local address range automatically 1. IPv6 - Enable or disable the IPv6 protocol. 219
![](/manual_guide/products/brother-international-hll2350dw-online-users-guide-html-15c6e11/223.png)