Brother International HL5050 Users Manual - English - Page 94

4 Options This printer has the following optional accessories. You can increase the capabilities of the printer with these items. Click the symbol L in the table to see the information for each item. Model HL-5030 HL-5040 HL-5050 HL-5070N DIMM N/A L L L Lower tray unit N/A L L L Print server N/A L L Standard DIMM We recommend that you expand the printer memory to avoid any memory full errors. For HL-5040 This printer has 8 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 136MB by installing a commercially available DIMM (Dual In-line Memory Module). For HL-5050 and HL-5070N These printers have 16 MB of standard memory and a slot for optional additional memory. The memory can be expanded up to a total of 144 MB by installing a commercially available DIMM (Dual In-line Memory Module). The following DIMM size can be installed: ■ 16 Mbyte ■ 32 Mbyte ■ 64 Mbyte ■ 128 Mbyte TECHWORKS TECHWORKS TECHWORKS TECHWORKS 12456-0001 12457-0001 12458-0001 12459-0001 For more information, visit Techworks web site at www.techworks.com In general, DIMM must have the following specifications: Type CAS Latency Clock Frequency Capacity Height Parity DRAM Type 100 pin and 32 bit output 2 or 3 66MHz or more 16, 32, 64 Mbyte or 128 Mbyte 35 mm (1.4 inches) or less NONE SDRAM 4 Bank ■ Additional memory is useful and may be necessary if you are using the Page Protection function. (For HL-5070N) ■ You have to expand the printer memory by adding a DIMM to use the FTP/IPP protocol. OPTIONS 4 - 1